Samsung Error Codes
& Diagnostics

E-08 Cooktop The E-08 error code indicates that a temperature sensor on the Samsung cooktop has an open or shorted circuit. The sensor is unable to send accurate temperature readings to the control board, which prevents the cooktop from properly regulating heat output for safe and consistent cooking performance. High View details → E-0A Cooktop The E-0A error code on Samsung cooktops indicates that the internal overheating protection system has been activated. The cooktop has detected temperatures exceeding safe operational limits and has shut down the affected cooking zone or the entire unit to prevent damage to internal components and reduce fire risk. High View details → F-ER Cooktop The F-ER error code on Samsung induction cooktops indicates a power supply fault in one or more induction zones. The inverter board that converts household electricity into the high-frequency current needed to drive the induction coil has detected an abnormal voltage, current, or frequency condition that prevents safe operation. High View details → HE Cooktop The HE error code on Samsung cooktops indicates that a heating element or induction coil has failed or is not functioning within its expected electrical parameters. The control board detects an abnormal resistance or continuity reading from the heating component, which means it cannot safely deliver heat to the cooking zone. High View details → HOT Cooktop The HOT indicator on Samsung cooktops is a residual heat warning that displays when the glass surface retains enough heat to cause burns after a cooking zone has been turned off. This is a normal safety feature rather than an error, but it can indicate a sensor fault if it stays on when the surface has fully cooled. Low View details → O-10 Cooktop The O-10 error code on Samsung cooktops indicates that the unit has detected dangerously high temperatures and automatically shut off as a protective measure. Unlike the E-0A code which targets internal component heat, O-10 typically relates to the cooking surface or element itself exceeding maximum safe temperature thresholds during operation. High View details → SE Cooktop The SE error code on Samsung cooktops indicates that one or more touch-sensitive control keys are stuck, shorted, or registering continuous input. This typically results from moisture beneath the control panel, a faulty touch membrane, or a defective control board that misreads key signals. Medium View details → U-10 Cooktop The U-10 error code on Samsung induction cooktops indicates that the selected cooking zone cannot detect compatible cookware on its surface. The induction coil requires ferromagnetic cookware to create the electromagnetic field necessary for heating, and this error appears when the sensor detects no suitable vessel or improper placement. Low View details → 1E Dishwasher The dishwasher water level sensor has detected an abnormal condition. The pressure switch is not reading the expected water level during the fill or wash phase, indicating a sensor failure or wiring issue on Samsung dishwasher models including the Bespoke and StormWash series. Medium View details → 3E Dishwasher The dishwasher has detected a button or sensor error on the control panel. A key is stuck or the touch-sensor circuit is reading a continuous input, preventing normal operation on Samsung dishwasher models. Low View details →